Chapter 7 LAN Setup
The following table describes the fields in this screen.
Table 18 Network > LAN > IP
LABEL
IP Address
IP Subnet Mask
Apply
Cancel
Advanced Setup
7.2.1 The Advanced LAN IP Setup Screen
Use this screen to edit your P-792H v2's RIP, multicast, Any IP and Windows
Networking settings. Click the Advanced Setup button in the LAN IP screen. The
screen appears as shown.
Figure 34 Network > LAN > IP: Advanced Setup
88
DESCRIPTION
Enter the LAN IP address you want to assign to your P-792H v2 in
dotted decimal notation, for example, 192.168.1.1 (factory default).
Type the subnet mask of your network in dotted decimal notation, for
example 255.255.255.0 (factory default). Your P-792H v2
automatically computes the subnet mask based on the IP Address you
enter, so do not change this field unless you are instructed to do so.
Click this to save your changes.
Click this to restore your previously saved settings.
Click this to display the Advanced LAN Setup screen and edit more
details of your LAN setup.
P-792H v2 User's Guide