Ricoh M281 Series Service Manual page 778

Main SP Tables-8

The B/W and Color counts are done after the document is stored on the HDD of the Scan
Router server.

If the job is canceled before storage on the Scan Router server finishes, the counts are
not done.

The count is executed even if regardless of confirmation of the arrival at the Scan Router
server.
8671 T:Deliv PGS/PC
These SPs count by color mode the total number of pages sent to a folder
on a PC (Scan-to-PC) with the Scan and LS applications.
8675 S: Deliv PGS/PC
These SPs count by color mode the total number of pages sent with
Scan-to-PC with the Scan application.
867x-001 B/W
867x-002 Color
8681 T:PCFAX
TXPGS
8683 F:PCFAX
TXPGS

This counts pages sent from a PC using a PC fax application, from the PC through the copier
to the destination.

When sending the same message to more than one place using broadcasting, the pages are
only counted once. (For example, a 10-page fax is sent to location A and location B. The
counter goes up by 10, not 20.)
8691 T:TX PGS/LS
8692 C:TX PGS/LS
8693 F:TX PGS/LS
8694 P:TX PGS/LS
D255/D256/M281/M282
*CTL [0 to 99999999/ 0 / 1/step]
*CTL [0 to 99999999/ 0 / 1/step]
*CTL These SPs count the number of pages sent by
PC Fax. These SPs are provided for the Fax
application only, so the counts for SP8 681 and
*CTL
SP8 683 are the same.
[0 to 99999999/ 0 / 1/step]
*CTL These SPs count the number of pages sent
from the document server. The counter for the
*CTL
application that was used to store the pages is
incremented.
*CTL
[0 to 99999999/ 0 / 1/step]
*CTL
3-138 SM Appendix