Ricoh M281 Series Service Manual page 376

Firmware Update
Keys or buttons to press
[Exit] or 10 key [0]
[Start] Key
[Clear/Stop] key
Display contents
On the above screen, two programs, i.e., engine firmware and printer application are
displayed. (The screen may change depending on the firmware or application).
The display contents are as follows:
Display
ROM:
NEW:
* The upper row corresponds to the module number, the lower row corresponds to the
version name.
8. Select the module with the module selection button or 10 key operation. The selected module
is highlighted, and [Verify] and [Update] are displayed.

Depending on the combination of update software, it may not be possible to select
simultaneously.
Key or button operations
Keys or buttons to press
[Update] or [#] key
[Verify] button or [./*] key
D255/D256/M281/M282
Returns to normal screen.
Select all modules.
Cancel all selection states.
Display installed module number / version information.
Display module number / version information in the card.
Update the ROM of the selected module.
Perform verification of the selected module.
Contents
Contents
Contents
5-6 SM