Ricoh M281 Series Service Manual page 933

Communication Switch 05 (SP No. 1-104-006)
No Function
0-3 Remote mode switch number
00-09 (0-9:HEX)
4-7 Not used
Communication Switch 06 - Not used (do not change the settings)
Communication Switch 07 - Not used (do not change the settings)
Communication Switch 08 - Not used (do not change the settings)
Communication Switch 09 (SP No. 1-104-009)
No Function
0-7 Minimum interval between
automatic dialing attempts
Communication Switch 0A (SP No. 1-104-011)
No Function
0 Point of resumption of memory
transmission upon redialing
0: From the error page
1: From page 1
1-7 Not used
Communication Switch 0B (SP No. 1-104-012)
No Function
0-3 Not used
SM
Comments
Enter the number to switch between
TEL/FAX modes using the external phone.
Do not change the settings.
Comments
This value is the minimum time that the
machine waits before it dials the next
destination.
Comments
0: The transmission begins from the page
where transmission failed the previous time.
1: Transmission begins from the first page,
using normal memory transmission.
Do not change these settings.
Comments
Do not change these settings.
99
Bit Switches - 3
D255/D256 FAX OPTION