Fax Connection Unit Error Codes; Fax Connection Unit Error Code List; Machine_Err_01; Machine_Err_02 - Ricoh M281 Series Service Manual

3.2 FAX CONNECTION UNIT ERROR CODES

3.2.1 FAX CONNECTION UNIT ERROR CODE LIST

MACHINE_ERR_01

Error
Possible Causes
Code
01(1) IPv4/IPv6 not enabled
01(3) "Cancel" is pressed by user.
01(4) A false connection ID is being used.
Network is disconnected because of no
01(5)
response within a specified time.

Either this machine or the machine
at the other party has entered SP
01(14)
mode or Initial settings.

An established connection exists.

MACHINE_ERR_02

Error
Possible Causes
Code

Wrong IP address/host name was
used.

The main power of the other
02(5)
machine at destination is OFF.

LAN cable is disconnected.

Network is rebooting.
SM
Fax Connection Unit Error Codes
Troubleshooting Procedures
Enable IPv4 and IPv6
-
Check that the network is
established.

Exit SP mode or initial settings.

Wait until the connection has
finished.
Troubleshooting Procedures

Enter the correct IP
address/host name

Turn ON the main power.

Connect the LAN cable

Wait until rebooting has
finished.
45 D255/D256 FAX OPTION