Ricoh M281 Series Service Manual page 414

UP/SP Data Import/Export

@Remote-related data

Counters

Settings that can only be specified via Web Image Monitor or Web Service (for example,
Bonjour, SSDP setting)
Exporting Device Information
This can be exported / imported by an administrator with all privileges.
When exporting SP device information from the control panel, the data is saved on an SD card.
1. Insert an SD card into the media slot on the side of the operation panel.
2. Log in from the operation panel as an administrator with all privileges.
3. Press [System Settings].
4. Press [Administrator Tools].
5. Press [Next] three times.
6. Press [Device Setting Information: Export (Memry Strge Devc)].
7. Set the export conditions.

Specify whether to [Include] or [Exclude] the "Device Unique Information". "Device
Unique Information" includes the IP address, host name, fax number, etc.

Specify an encryption key.
D255/D256/M281/M282 5-44 SM