Ricoh M281 Series Service Manual page 740

Main SP Tables-8
Abbreviation
TonEnd
TonSave
TXJob
YMC
YMCK

All of the Group 8 SPs are reset with SP5 801 1 Memory All Clear.
T:Total Jobs
8001
8002 C:Total Jobs
8003 F:Total Jobs
8004 P:Total Jobs
8005 S:Total Jobs
8006 L:Total Jobs

These SPs reveal the number of times an application is used, not the number of pages
processed.

When an application is opened for image input or output, this counts as one job.

Interrupted jobs (paper jams, etc.) are counted, even though they do not finish.

Only jobs executed by the customer are counted. Jobs executed by the customer engineer
using the SP modes are not counted.

When using secure printing (when a password is required to start the print job), the job is
counted at the time when either "Delete Data" or "Specify Output" is specified.

A job is counted as a fax job when the job is stored for sending.

When a fax is received to fax memory, the F: counter increments but the L: counter does not
(the document server is not used).

A fax broadcast counts as one job for the F: counter (the fax destinations in the broadcast are
not counted separately).

A fax broadcast is counted only after all the faxes have been sent to their destinations. If one
transmission generates an error, then the broadcast will not be counted until the transmission
D255/D256/M281/M282
Toner End
Toner Save
Send, Transmission
Yellow, Magenta, Cyan
Yellow, Magenta, Cyan, Black
These SPs count the number of times each
*CTL
application is used to do a job.
[0 to 99999999/ 0 / 1/step]
*CTL
Note: The L: counter is the total number of
times the other applications are used to send
*CTL
a job to the document server, plus the
*CTL
number of times a file already on the
document server is used.
*CTL
*CTL
3-100
What it means
SM Appendix