Ricoh M281 Series Service Manual page 510

Service Call 816-899
No. Type
SC860-00 B
D255/D256/M281/M282
Error Name/Error Condition/Major Cause/Solution
HDD startup error at main power on (HDD error)

The HDD is connected but the driver detected the following
errors.

SS_NO.T_READY:/* (-2)HDD does not become READY*/

SS_BAD_LABEL:/* (-4)Wrong partition type*/

SS_READ_ERROR:/* (-5)Error occurred while reading or
checking the label*/

SS_WRITE_ERROR:/* (-6)Error occurred while writing or
checking the label*/

SS_FS_ERROR:/* (-7)Failed to repair the filesystem*/

SS_MOUNT_ERROR:/* (-8)Failed to mount the filesystem*/

SS_COMMAND_ERROR:/* (-9)Drive not responding to
command*/

SS_KERNEL_ERROR:/* (-10)Internal kernel error*/

SS_SIZE_ERROR:/* (-11)Drive size too small*/

SS_NO._PARTITION:/* (-12)The specified partition does not
exist*/

SS_NO._FILE:/* (-13)Device file does not exist*/

Attempted to acquire HDD status through the driver but there
has been no response for 30 seconds or more.

Unformatted HDD

Label data corrupted

HDD defective
Format the HDD (SP5-832: HDD formatting) through SP mode.
6-72 SM