Ricoh M281 Series Service Manual page 395

4. Touch [Execute Update].
5. Check the version of the received package firmware, and then touch [YES].

Update is started.

If the version of the reserved package in the HDD is older than the latest version, the
messages shown in the following picture are displayed.

If you wish to download the latest version, touch [Execute] beside the message
"Download and update the latest package." Then update of the package firmware will
be started.

If you wish to update using the firmware in the HDD (old version), touch [Execute]
beside the message "Update to the received package."
SM
Package Firmware Update (MP 501/601 Only)
5-25 D255/D256/M281/M282