Ricoh M281 Series Service Manual page 522

Service Call 816-899
No. Type
SC874-61 D
to -65
SC874-66 D
SC874-67 D
SC874-68 D
SC874-69 D
SC874-70 D
SC874-99 D
D255/D256/M281/M282
Error Name/Error Condition/Major Cause/Solution
Delete all error (Delete data area) : library error
Delete all error (Delete data area) : Unavailable
Delete all error (Delete data area) : Erasing not finished
Delete all error (Delete data area) : HDD format failure (Normal)
Delete all error (Delete data area) : HDD format failure
(Abnormal)
Delete all error (Delete data area) : Unauthorized library (MP
501/601 Only)
Delete all error (Delete data area) : other errors
An error occurred while data was being erased on HDD or
NVRAM.

Error detected in HDD data delete program

Error detected in NVRAM data delete program

The "Delete All" option was not set

Turn the main power OFF and back on, and then execute
"Erase All Memory" under UP mode again. (However, if there
is a defective sector or other problem with the hard disk, the
error will persist even after trying the above.)

If the "Delete All" option is not installed when this error
occurs, install the option.
6-84 SM