Ricoh M281 Series Service Manual page 746

Main SP Tables-8
These SPs count and calculate the number of scan jobs by size based on the
number of pages in the job.
8076 L:Jobs/PGS
These SPs count and calculate the number of jobs printed from within the
document server mode window at the operation panel, by the number of pages
in the job.
8077 O:Jobs/PGS
These SPs count and calculate the number of "Other" application jobs (Web
Image Monitor, Palm 2, etc.) by size based on the number of pages in the job.
Last three digits for SP8 071 to 077
807x-001 1 Page
807x-002 2 Pages
807x-003 3 Pages
807x-004 4 Pages
807x-005 5 Pages
807x-006 6 to 10 Pages
807x-007 11 to 20 Pages

For example: When a copy job stored on the document server is printed in document server
mode, the appropriate L: counter (SP8076 0xx) increments.

Printing a fax report counts as a job and increments the F: counter (SP 8073).

Interrupted jobs (paper jam, etc.) are counted, even though they do not finish.

If a job is paused and re-started, it counts as one job.

If the finisher runs out of staples during a print and staple job, then the job is counted at the
time the error occurs.

For copy jobs (SP 8072) and scan jobs (SP 8075), the total is calculated by multiplying the
number of sets of copies by the number of pages scanned. (One duplex page counts as 2.)

The first test print and subsequent test prints to adjust settings are added to the number of
pages of the copy job (SP 8072).

When printing the first page of a job from within the document server screen, the page is
counted.
D255/D256/M281/M282
*CTL [0 to 99999999/ 0 / 1/step]
*CTL [0 to 99999999/ 0 / 1/step]
8 07x 8 21 to 50 Pages
8 07x 9 51 to 100 Pages
8 07x 10 101 to 300 Pages
8 07x 11 301 to 500 Pages
8 07x 12 501 to 700 Pages
8 07x 13 701 to 1000 Pages
8 07x 14 More than 1001 Pages
3-106 SM Appendix