Ricoh M281 Series Service Manual page 924

Bit Switches - 2
0* Length reduction of received
data
0: Disabled
1: Enabled
1-3 Not used
4 Page separation setting when
to sub scan compression is
7 forbidden
00-0F (0-15 mm: Hex)
Default: 6 mm
* This setting can be used for the client machine which has no FCU.
No Function
0 Maximum reducible length when length reduction is enabled with switch 03-0
to above.
4 [Maximum reducible length] = [Paper length] + (N x 5mm)
"N" is the decimal value of the binary setting of bits 0 to 4.
Bit 4
0
0
0
1
D255/D256 FAX OPTION
0: Incoming pages are printed without length
reduction.
(Page separation threshold: Printer Switch 03,
bits 4 to 7)
1: Incoming page length is reduced when
printing.
(Maximum reducible length: Printer Switches
04, bits 0 to 4)
Do not change the settings
Page separation threshold (with reduction
disabled with switch 03-0 above).
For example, if this setting is set to "10", and
A4 is the selected paper size:
If the received document is 10 mm or less
longer than A4, then the 10 mm are cut and
only 1 page prints.
If the received document is 10 mm longer than
A4, then the document is split into 2 pages.
Printer Switch 04 (SP No. 1-103-005)
Bit 3 Bit 2
0 0
0 0
0 1
1 1
90
Comments
Bit 1 Bit 0
0 0
0 1
0 0
1 1
Setting
0 mm
5 mm
20 mm
155 mm
SM