Ricoh M281 Series Service Manual page 907

0-7 Threshold memory level for
parallel memory transmission
No Function
0 TTI printing position
0: Superimposed on the page
data
1: Printed before the data
leading edge
1-2 Not used
3 TTI used for broadcasting
0: The TTIs selected for each
Quick/Speed dial are used
1: The same TTI is used for all
destinations
4-7 Not used
No Function
0-7 TTI printing position in the main
scan direction
SM
Threshold = N x 128 KB + 256 KB
N can be between 00 - FF(H)
Default setting: 02(H) = 512 KB
System Switch 11 (SP No. 1-101-018)
Change this bit to 1 if the TTI overprints
information that the customer considers to be
important (G3 transmissions).
NOTE: If "1" is selected, it is possible that sent
data is printed on two sheets of paper.
Do not change these settings.
1: The TTI (TTI_1 or TTI_2) which is selected
for all destinations during broadcasting.
Do not change these settings.
System Switch 12 (SP No. 1-101-019)
TTI: 08 to 92 (BCD) mm
Input even numbers only.
This setting determines the print start position
for the TTI from the left edge of the paper. If the
TTI is moved too far to the right, it may
overwrite the file number which is on the top
right of the page. On an A4 page, if the TTI is
moved over by more than 50 mm, it may
overwrite the page number.
73
Bit Switches - 1
Comments
Comments
D255/D256 FAX OPTION