Ricoh M281 Series Service Manual page 744

Main SP Tables-8
These SPs total finishing methods for copy jobs only. The finishing method is
specified by the application.
8063 F:FIN Jobs
These SPs total finishing methods for fax jobs only. The finishing method is
specified by the application.
Note: Finishing features for fax jobs are not available at this time.
8064 P:FIN Jobs
These SPs total finishing methods for print jobs only. The finishing method is
specified by the application.
8065 S:FIN Jobs
These SPs total finishing methods for scan jobs only. The finishing method is
specified by the application.
Note: Finishing features for scan jobs are not available at this time.
8066 L:FIN Jobs
These SPs total finishing methods for jobs output from within the document
server mode screen at the operation panel. The finishing method is specified
from the print window within document server mode.
8067 O:FIN Jobs
These SPs total finishing methods for jobs executed by an external application,
over the network. The finishing method is specified by the application.
Last three digits for SP8 061 to 067
806x-001 Sort
806x-002 Stack
806x-003 Staple
806x-004 Booklet
D255/D256/M281/M282
*CTL [0 to 99999999/ 0 / 1/step]
*CTL [0 to 99999999/ 0 / 1/step]
*CTL [0 to 99999999/ 0 / 1/step]
*CTL [0 to 99999999/ 0 / 1/step]
*CTL [0 to 99999999/ 0 / 1/step]
Number of jobs started in Sort mode. When a stored
copy job is set for Sort and then stored on the
document server, the L: counter increments. (See
SP8 066 1)
Number of jobs started out of Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the
machine is in staple mode, the Staple counter also
increments.
3-104 SM Appendix