Ricoh M281 Series Service Manual page 403

Updating JavaVM
1. Insert VM CARD Type P8 into SD memory card reader/writer of your PC.
2. Check that the SD memory card reader/writer is detected on your PC, and then write
down the drive letter. (If the SD memory card reader/writer is detected as (F:), the drive
letter is "f")
3. Download the update modules from Firmware Download Center.
4. Unzip the downloaded file, and then execute the .exe file.
5. The folder is generated.
6. Execute the .bat file in the folder.
7. Input the drive letter following a message "Please input drive letter of SD card [a - x]: ".
(If the SD memory card reader/writer is detected as (F:), input "f")
8. Press the [Enter] key to start updating Java VM.
It takes 3 minutes to update Java VM.
9. After completing the update, remove VM CARD Type P8 from SD memory card
reader/writer of your PC.
SM 5-33
Updating JavaVM
D255/D256/M281/M282