Ricoh M281 Series Service Manual page 922

Bit Switches - 2
1 Repetition of data when the
received page is longer than
the printer paper
0: Off
1: On
2 Prints the date and time on
received fax messages
0: Disabled
1: Enabled
3-7 Not used
No Function
0-6 Not used
7 Received message width
restriction in the protocol signal
to the sender
0: Disabled
1: Enabled
Relationship between available paper sizes and printer width used in the setup protocol
Available Paper Size
A4 or 8.5" x 11"
B5
A5 or 8.5" x 5.5"
D255/D256 FAX OPTION
1: Default. 10 mm of the trailing edge of the
previous page are repeated at the top of the next
page.
0: The next page continues from where the
previous page stopped without any repeated text.
This switch is only effective when user parameter
02 - bit 2 (printing the received date and time on
received fax messages) is enabled.
1: The machine prints the received and printed
date and time at the bottom of each received
page.
Do not change the settings.
Printer Switch 01 (SP No. 1-103-002)
Do not change the settings.
0: The machine informs the transmitting
machine of the print width depending on the
paper size available from the paper feed
stations.
Refer to the table on the next page for how the
machine chooses the paper width used in the
setup protocol (NSF/DIS).
1: The machine informs the transmitting
machine of the fixed paper width which is
specified by bits 3 and 4 above.
Printer width used in the Protocol (NSF/DIS)
297 mm width
256 mm width
216 mm width
88
Comments
SM