Ricoh M281 Series Service Manual page 743

etc.) the L: counter increments.
8041 T:TX Jobs/LS
8042 C:TX Jobs/LS
8043 F:TX Jobs/LS
8044 P:TX Jobs/LS
8045 S:TX Jobs/LS
8046 L:TX Jobs/LS
8047 O:TX Jobs/LS

When a stored copy job is sent from the document server, the C: counter increments.

When images stored on the document server by a network application or Palm2 are sent as
an e-mail, the O: counter increments.
8051 T:TX Jobs/DesApl
8052 C:TX Jobs/DesApl
8053 F:TX Jobs/DesApl
8054 P:TX Jobs/DesApl
8055 S:TX Jobs/DesApl
8056 L:TX Jobs/DesApl
8057 O:TX Jobs/DesApl

If the send is started from Desk Top Binder or Web Image Monitor, for example, then the O:
counter increments.
8061 T:FIN Jobs
These SPs total the finishing methods. The finishing method is specified by the
application.
8062 C:FIN Jobs
SM Appendix
*CTL These SPs count the applications that stored
files on the document server that were later
*CTL
accessed for transmission over the telephone
line or over a network (attached to an e-mail,
*CTL
or as a fax image by I-Fax).
*CTL
[0 to 99999999/ 0 / 1/step]
Note: Jobs merged for sending are counted
*CTL
separately.
*CTL
The L: counter counts the number of jobs
scanned from within the document server
*CTL
mode screen at the operation panel.
*CTL These SPs count the applications used to
send files from the document server over the
*CTL
telephone line or over a network (attached to
an e-mail, or as a fax image by I-Fax). Jobs
*CTL
merged for sending are counted separately.
*CTL
[0 to 99999999/ 0 / 1/step]
The L: counter counts the number of jobs sent
*CTL
from within the document server mode screen
*CTL
at the operation panel.
*CTL
*CTL [0 to 99999999/ 0 / 1/step]
*CTL [0 to 99999999/ 0 / 1/step]
3-103
Main SP Tables-8
D255/D256/M281/M282