Ricoh M281 Series Service Manual page 919

Enables or disables a function to adjust the file size in the main scan direction
when sending a TIFF file to e-mail destination or folder destination.
0: OFF (Disable)
1: ON (Enable)
3-7 Not Used
I-fax Switch 06 - Not used (do not change the settings)
I-fax Switch 07 - Not used (do not change the settings)
No Function
0-7 Memory Threshold for POP Mail Reception
This setting determines the amount of SAF (Store and Forward) memory. (SAF
stores fax messages to send later for transmission to more than one location, and
also holds incoming messages if they cannot be printed.) When the amount of
SAF memory available falls below this setting, mail can no longer be received;
received mail is then stored on the mail server.
00-FF (0 to 1024 KB: HEX)
The hexadecimal number you enter is multiplied by 4 KB to determine the amount
of memory.
No Function
0-3 Not used
4-7 Restrict TX Retries
I-fax Switch 0A - Not used (do not change the settings)
I-fax Switch 0B - Not used (do not change the settings)
SM
I-fax Switch 08 (SP No. 1-102-009)
I-fax Switch 09 (SP No. 1-102-010)
Do not change the settings
This setting determines the number of retries
when connection and transmission fails due to
errors.
01-F (1-15 Hex)
85
Bit Switches - 2
Comments
Comments
D255/D256 FAX OPTION