Ricoh M281 Series Service Manual page 926

Bit Switches - 2
4 Receiver name printed on the
transmission result report
5-7 Not used.
Printer Switch 08 - Not used (do not change the settings)
Printer Switch 09 - Not used (do not change the settings)
Printer Switch 0A - Not used (do not change the settings)
Printer Switch 0B - Not used (do not change the settings)
Printer Switch 0C - Not used (do not change the settings)
No
0* Paper size selection priority
0: Width
1: Length
1* Paper size selected for printing A4
width fax data
0: 8.5" x 11" size
1: A4 size
2 Page separation
0: Enabled
1: Disabled
3-4 Printing the sample image on reports
D255/D256 FAX OPTION
Selects the printing target on the transmission
result report.
0: All receivers
1: Printing only receivers which have received
fax transmission.
Do not change the settings.
Printer Switch 0E (SP No. 1-103-015)
Function Comments
0: A paper size that has the same width
as the received data is selected first.
1: A paper size which has enough length
to print all the received lines without
reduction is selected first.
This switch determines which paper size
is selected for printing A4 width fax data,
when the machine has both A4 and 8.5" x
11" size paper.
1: If all paper sizes in the machine require
page separation to print a received fax
message, the machine does not print the
message (Substitute Reception is used).
After a larger size of paper is set in a
cassette, the machine automatically
prints the fax message.
"Same size" means the sample image is
92 SM