Ricoh M281 Series Service Manual page 753

8231 Scan PGS/Mode
These SPs count the number of pages scanned by each ADF mode to
determine the work load on the ADF.
001 Large Volume
002 SADF
003 Mixed Size
004 Custom Size
005 Platen
006 Mixed 1side/2side

If the scan mode is changed during the job, for example, if the user switches from ADF to
Platen mode, the count is done for the last selected mode.

The user cannot select mixed sizes or non-standard sizes with the fax application so if the
original's page sizes are mixed or non-standard, these are not counted.

If the user selects "Mixed Sizes" for copying in the platen mode, the Mixed Size count is
enabled.

In the SADF mode if the user copies 1 page in platen mode and then copies 2 pages with
SADF, the Platen count is 1 and the SADF count is 3.
8241 T:Scan PGS/Org
These SPs count the total number of scanned pages by original type for all
jobs, regardless of which application was used.
8242 C:Scan PGS/Org
These SPs count the number of pages scanned by original type for Copy jobs.
8243 F:Scan PGS/Org
These SPs count the number of pages scanned by original type for Fax jobs.
SM Appendix
*CTL [0 to 99999999/ 0 / 1/step]
Selectable. Large copy jobs that cannot be
loaded in the ADF at one time.
Selectable. Feeding pages one by one through
the ADF.
Selectable. Select "Mixed Sizes" on the operation
panel.
Selectable. Originals of non-standard size.
Book mode. Raising the ADF and placing the
original directly on the platen.
Simplex and Duplex mode.
*CTL [0 to 99999999/ 0 / 1/step]
*CTL [0 to 99999999/ 0 / 1/step]
*CTL [0 to 99999999/ 0 / 1/step]
3-113
Main SP Tables-8
D255/D256/M281/M282