Ricoh M281 Series Service Manual page 385

Code
70 Package firmware download
from the network fails.
71 Network communication error
occurs at the reserved
date/time of the package
firmware update from the
*1
network.
72 The setting of @Remote is
invalid at the reserved
date/time of the package
firmware update from the
*1
network.
*1 The error occurs in MP 501/601 only

The PDF firmware installed as standard contains a program required to print PS3 data as
default. However, this PS3 program is normally disabled.

The PS3 firmware is a dongle (key) which enables PS3 data printing functions. When the
PS3 firmware is installed, the PS3 program in the PDF firmware is enabled. Due to this
specification, the self-diagnosis result report shows the ROM part number/software
version of the PDF firmware contained in the PS3 program.
SM
Contents

*1


5-15
Solutions
Check that the network is connected
correctly.
Check that the network is connected
correctly.
Set the setting of @Remote Service in
the Administrator Tools to [Do not
Prohibit].
D255/D256/M281/M282
Firmware Update