Ricoh M281 Series Service Manual page 954

Bit Switches - 5
0
Other settings - Not used
No.
0 TSI information
0: Not added, 1: Added
1 DCN transmission setting at T1
timeout
0: Not transmitted
1: Transmitted
2 Not used
3 Hang up setting at DIS reception
disabled
0: No hang up
1: Hang up after transmitting DCN
4 Number of times for training
0: 1 time, 1: 2 times
5 Space CSI transmission setting at
no CSI registration
0: Not transmitted
1: Transmitted
6-7 Not used
No.
0-1 T1 timer adjustment
Bit 1
0
0
D255/D256 FAX OPTION
1 0
IP Fax Switch 07 (SP No. 1-111-008)
Function
IP Fax Switch 08 (SP No. 1-111-009)
Function
Bit 0
0 35 s
1 40 s
0 V.27ter, V.29, V.17/V.33
Comments
Adds or does not add TSI information to
NSS(S).
Transmits or does not transmit DCN at T1
timeout.
Do not change this setting.
Sets whether the machine disconnects after
DIS reception.
Selects the number of times training is done
at the same bit rate.
When "0" is selected, frame data is enabled.
When "1" is selected, the transmitted data is
all spaces.
Do not change these settings.
Comments
Adjusts the T1 timer.
The default is "00" (35 seconds).
120 SM