Ricoh M281 Series Service Manual page 758

Main SP Tables-8
8321 T:Sacn Poster
8322 C:Sacn Poster
8326 L:Sacn Poster
832x-001 2 Sheet
832x-002 4 Sheet
832x-003 9 Sheet
8381 T:Total PrtPGS
8382 C:Total PrtPGS
8383 F:Total PrtPGS
8384 P:Total PrtPGS
8385 S:Total PrtPGS
8386 L:Total PrtPGS
8387 O:Total PrtPGS

When several documents are merged for a print job, the number of pages stored is counted
for the application that stored them.

These counters are used primarily to calculate charges on use of the machine, so the
following pages are not counted as printed pages:
- Blank pages in a duplex printing job.
- Blank pages inserted as document covers, chapter title sheets, and slip sheets.
- Reports printed to confirm counts.
- All reports done in the service mode (service summaries, engine maintenance reports, etc.)
- Test prints for machine image adjustment.
- Error notification reports.
- Partially printed pages as the result of a copier jam.
D255/D256/M281/M282
*CTL [0 to 99999999/ 0 / 1/step]
*CTL [0 to 99999999/ 0 / 1/step]
*CTL [0 to 99999999/ 0 / 1/step]
*CTL These SPs count the number of
pages printed by the customer. The
*CTL
counter for the application used for
storing the pages increments.
*CTL
[0 to 99999999/ 0 / 1/step]
*CTL
The L: counter counts the number of
pages stored from within the
*CTL
document server mode screen at the
*CTL
operation panel. Pages stored with
the Store File button from within the
*CTL
Copy mode screen go to the C:
counter.
3-118 SM Appendix