Ricoh M281 Series Service Manual page 427

5.8.3 UPLOAD
1. Turn OFF the main power.
2. Remove the controller cover. (MP 501/601: page 4-45, SP 5300/5310: page 4-67)
3. Install the SD card, which has already been uploaded, into the SD Card Slot 2 (lower)
[A].
MP 501/601
SP 5300/5310
4. Turn ON the main power.
5. Enter the SP mode.
6. Execute SP5-846-052 (Restore All Addr Book).
7. Exit the SP mode, and then turn OFF the main power.
8. Remove the SD card from the SD Card Slot 2 (lower).
9. Reassemble the machine.

The counter in the user code information is initialized after uploading.

The information of an administrator and supervisor cannot be downloaded nor uploaded.

If there is no data of address book information in the SD card, an error message is
displayed.
SM
Address Book Upload/Download
5-57 D255/D256/M281/M282