Ricoh M281 Series Service Manual page 911

0 Communication after the
Journal data storage area has
become full
0: Impossible
1: Possible
1* Action when the SAF memory
has become full during
scanning
0: The current page is erased.
1: The entire file is erased.
2 RTI/CSI display priority
0: RTI 1: CSI
3 File No. printing
0: Enabled
1: Disabled
SM
0: When this switch is on and the journal
history becomes full, the next report prints. If
the journal history is not deleted, the next
transmission cannot be received. This prevents
overwriting communication records before the
machine can print them.
1: If the buffer memory of the communication
records for the Journal is full, fax
communications are still possible. But the
machine will overwrite the oldest
communication records.

This setting is effective only when
Automatic Journal printout is enabled
but the machine cannot print the report
(e.g., no paper).
0: If the SAF memory becomes full during
scanning for a memory transmission, the
successfully scanned pages are transmitted.
1: If the SAF memory becomes full during
scanning for a memory transmission, the file is
erased and no pages are transmitted.

This setting is effective only when
Automatic Journal printout is enabled
but the machine cannot print the report
(e.g., no paper).
This bit determines which identifier, RTI or CSI,
is displayed on the LCD while the machine is
communicating in G3 non-standard mode.
1: File numbers are not printed on any reports.
NOTE: The file numbers may not be printed in
the sequential order. If a customer does not like
this numbering, select "0".
77
Bit Switches - 1
D255/D256 FAX OPTION