Figure D.2 Memory Map Of Piggyback/Evaluation Device - Fujitsu F2MC-8L MB89620 Series Hardware Manual

D Programming Specifications for One-time PROM and EPROM Microcontrollers
D.2 Programming to EPROM with Piggyback/Evaluation Device
This section describes the programming to the EPROM with piggyback/evaluation
device
n EPROM for Use
MBM27C256A-20TV, MBM27C256A-20CZ
n Programming Socket Adapter
To program to the PROM using an EPROM programmer, use the socket adapter (manufacturer:
Sun Hayato Co., Ltd.) listed below.
Table D.2 Programming Socket Adapter
Package
LCC-32 (Rectangle)
LCC-32 (Square)
Inquiry: Sun Hayato Co., Ltd.: TEL 81-3-3802-5760
n Memory Space
n Programming to the EPROM
(1) Set the EPROM programmer to the MBM27C256A
(2) Load program data into the EPROM programmer at 0006
(3) Program to 0000
MB89620 series
Adapter socket part number
ROM-32LC-28DP-YG
ROM-32LC-28DP-S
Normal operation
0000
H
I/O
0080
H
RAM
0480
H
Not available
8000
H
Not available
8006
H
Program area
(PROM)
FFFF
H

Figure D.2 Memory Map of Piggyback/Evaluation Device

to 7FFF with the EPROM programmer.
H H
Corresponding addresses on
the EPROM programmer
0000
H
Not available
0006
H
Program area
(PROM)
7FFF
H
to 7FFF
H
.
H
295
APPENDIX
APPEND