Chapter 2 MB86R01 Evaluation Board to GHS adapter
2 MB86R01 Evaluation Board to GHS adapter
The Jade Evaluation Board is populated with a 20 pin JTAG and a separate 10 pin Trace
connector. However, the GreenHills Super Trace Probe (STP) has a special connector.
Therefore an adapter is needed to connect both devices. The adapter board can be ordered
from Fujitsu. Furthermore, the schematic and layout are available on request.
Figure 1 Adapter Board
an-mb86r01-trace-rev0-01.doc
- 6 -
© Fujitsu Microelectronics Europe GmbH