Fujitsu F2MC-8L MB89620 Series Hardware Manual page 48

Table 1.7c I/O Circuit Type (Continued)
Type
F
G
H
I
On the MB89V623, MB89T623, MB89V625 and MB89PV620, a pull-up resistor is not provided
Check:
as an option setting (without pull-up resistor).
MB89620 series
Circuit
P-ch
N-ch
R
N-ch
R
N-ch
Analog input
R
Remarks
• CMOS output
• N-ch open-drain output
• Hysteresis input
• Pull-up resistor optional
(The MB89623, MB89625,
MB89626, MB89627,
MB89628R, and MB89629R
only)
Approximately 50 k Ω /5.0 V
• N-ch open-drain output
• Analog input (A/D converter)
• Pull-up resistor optional
(Pull-up disabled when used
as an analog input)
Approximately 50 k Ω /5.0 V
• Hysteresis input
• Pull-up resistor optional
Approximately 50 k Ω /5.0 V
CHAPTER 1 OVERVIEW
27