Chassis; Caster Fork Assembly Replacement; Caster Fork Assembly Removal - Toro Z Master G3 3000 Series Service Manual

Caster Fork Assembly Replacement

Caster Fork Assembly Removal

1. Raise the front of the machine off the ground,
leaving enough clearance to remove the caster fork
from the frame.
2. Remove the grease cap from the frame (Fig. 001).
Fig. 001
3. Remove the locknut (Fig. 002).
Fig. 002
Toro Z Master G3 3000/5000/6000 Series Service Manual
4. Slide the caster fork assembly out of the frame (Fig.
003).
PICT-0351
PICT-0352a

CHASSIS

Fig. 003 PICT-0355
3
3-1