Electric PTO Clutch Replacement
Electric PTO Clutch Removal
1. Remove the battery negative cable from the battery.
2. Lift and remove the floor pan. With a 3/8" breaker
bar in the hole for the idler arm, loosen the mower
deck drive-belt and remove from the electric PTO
clutch (Fig. 469).
Fig. 469
3. Raise the machine in the rear and support it with
jack stands (Fig. 470).
Fig. 470
Toro Z Master G3 3000/5000/6000 Series Service Manual
4. Unplug the wire plug from the electric PTO clutch
(Fig. 471).
5. Remove the bolt, spring washers, and washer
retaining the electric PTO to the engine crankshaft
and remove from the clutch (Fig. 472).
DSCN-0020a
DSCN-0071a
MOWER DECKS
Fig. 471
Fig. 472
DSCN-0028a
6
DSCN-0031a
6-31