10. On the side of the machine being serviced, remove
the locknut from the wheel hub (Fig. 342).
Fig. 342
11. Disengage the park brake lever.
12. Remove the e-ring, washer, and brake pin from the
L-Bracket (Fig. 343).
Fig. 343
Toro Z Master G3 3000/5000/6000 Series Service Manual
HYDRAULIC SYSTEM
13. Hold the end of the threaded rod with a tool. With a
socket wrench, remove the lock nut and washer from
the end of the cable (Fig. 344). Remove the washer
and spring.
DSCN-4516a
14. Remove the e-ring from the groove in the cable end
and the cable anchor located on the transmission
(Fig. 345).
DSCN-4314a
Fig. 344
DSCN-4315a
Fig. 345
DSCN-4318a
5
5-25