Toro Z Master G3 3000 Series Service Manual page 159

MOWER DECKS
5. Press seal into the bottom of the spindle housing
(Fig. 450).
6. Install spindle shaft in the spindle housing (Fig. 451).
6
6-22
Fig. 450
DSCN-0115a
Fig. 451 DSCN-0122a
7. Install the spindle hub on the spindle shaft (Fig.
452).
8. Install the washer and lock nut retaining the spindle
hub to the spindle shaft. Torque the nut to 120 ± 5
ft-lbs. (162.7 ± 6.8 Nm) (Fig. 453).
9. Install the pulley on the spindle hub and torque the 3
flange nuts to 37 ± 4 ft-lbs. (50 ± 5.4 Nm).
10. Grease the spindle assembly using No. 2 grease.
Toro Z Master G3 3000/5000/6000 Series Service Manual
Fig. 452
DSCN-0123a
Fig. 453 DSCN-0125