Toro Z Master G3 3000 Series Service Manual page 85

ENGINE
5. Remove the 3 carriage bolts and nuts retaining the
LH bumper to the frame and rear guard (Fig. 222).
4
6. Remove the 2 nuts retaining the rear guard to the
frame and 1 carriage bolt and nut retaining the
muffler guard to the rear guard (Fig. 223).
4-2
Fig. 222 DSCN-0004a
Fig. 223 DSCN-0012a
7. Loosen the cable clamp and remove the throttle
cable (Fig. 224).
8. Remove the z-bend end of the cable from the throttle
arm assembly (Fig. 225).
Toro Z Master G3 3000/5000/6000 Series Service Manual
Fig. 224 DSCN-4253a
Fig. 225
DSCN-4258a