Toro Z Master G3 3000 Series Service Manual page 63

CHASSIS
6. Pull the brake cable out of the cable anchor on the
transmission and slide it out of the slot (Fig. 152).
3
7. Remove the two screws retaining the right hand
motion control cover assembly to the frame and
remove (Fig. 153).
3-42
Fig. 152 DSCN-4370a
Fig. 153 DSCN-2614a
8. Unplug the wire harness from the park brake switch
(Fig. 154).
9. Remove two screws and spacers retaining the park
brake handle assembly to the frame (Fig. 155).
Toro Z Master G3 3000/5000/6000 Series Service Manual
Fig. 154 DSCN-2617a
Fig. 155 DSCN-2619a