Toro Z Master G3 3000 Series Service Manual page 66

5. Route the brake cable back to the inside of the
frame (Fig. 163).
Fig. 163
6. Slide the brake cable into the cable anchor slot on
the transmission (Fig. 164).
Fig. 164
Toro Z Master G3 3000/5000/6000 Series Service Manual
7. Install the end of the brake cable through the cable
anchor and install the e-ring (Fig. 165).
DSCN-4379a
8. Install the L-Bracket, spring, washer, and nut on the
threaded end of the brake cable (Fig. 166).
DSCN-4370a
CHASSIS
Fig. 165 DSCN-4370a
Fig. 166
DSCN-4314a
3
3-45