Toro Z Master G3 3000 Series Service Manual page 97

HYDRAULIC SYSTEM
6. Lower the mower deck to the lowest position. Lift the
floor pan up and remove it (Fig. 265).
Note: On international models, unbolt the floor pan.
7. With a 3/8" drive breaker bar installed in the square
5
hole of the idler bracket, rotate the idler bracket
clockwise to relieve belt tension (Fig. 266).
5-2
Fig. 265 PICT-8543
Fig. 266 PICT-8545a
8. Remove the mower deck drive belt from the center
mower spindle pulley (Fig. 267).
9. Remove the mower deck drive belt from around the
electric PTO clutch and pull the belt forward so it
clears the hydro cradle assembly (Fig. 268).
Toro Z Master G3 3000/5000/6000 Series Service Manual
Fig. 267 PICT-8546a
Fig. 268 PICT-8693a