Left Park Brake Cable Installation (2012 & Later) - Toro Z Master G3 3000 Series Service Manual

Left Park Brake Cable Installation (2012 &
Later)
1. Install brake cable with the clevis end out toward the
park brake handle (Fig. 134).
Fig. 134
2. Install the brake cable grooved fitting into the slot on
the bottom of the brake pivot assembly and install
e-ring (Fig. 135).
Fig. 135
Toro Z Master G3 3000/5000/6000 Series Service Manual
3. Install the clevis pin through the clevis end of the
brake cable to the park-brake handle assembly and
install a cotter pin (Fig. 136).
DSCN-4358a
4. Install two screws and spacers through the park
brake handle and tighten the assembly to the frame
(Fig. 137).
DSCN-4335a
CHASSIS
Fig. 136 DSCN-4330a
Fig. 137
DSCN-2619a
3
3-37