Toro Z Master G3 3000 Series Service Manual page 91

ENGINE
7. Install the key to the engine crankshaft (Fig. 245).
4
8. Install the engine sheave on the crankshaft (Fig.
246).
4-8
Fig. 245 DSCN-0034a
Fig. 246 DSCN-0032a
9. Install the bolt, spring washers (with crown of the
washers facing the bolt head), and washer (Fig.
247).
A. Bolt
B. Spring Washer (2)
10. Install the electric PTO clutch on the crankshaft,
make sure the slot on the clutch fits on the clutch
anchor. Using the bolt, spring washers, and washer
torque the clutch bolt to 55 ± 6 ft-lbs. (74.6 ± 8.1 Nm)
(Fig. 248).
Toro Z Master G3 3000/5000/6000 Series Service Manual
C
B
A
Fig. 247 DSCN-0060a
C. Washer
Fig. 248 DSCN-0061a