Toro Z Master G3 3000 Series Service Manual page 88

17. Remove the key from the engine crankshaft (Fig.
234).
Fig. 234
18. Remove the 4 engine bolts and Belleville washers
retaining the engine to the frame (Fig. 235).
Fig. 235
Toro Z Master G3 3000/5000/6000 Series Service Manual
19. With a hoist raise the engine approximately 6" above
the frame (Fig. 236).
DSCN-0034a
20. Remove the starter motor bolt at the top of the
starter, then remove the battery ground wire and the
wiring harness ground wire (Fig. 237).
DSCN-0038a
ENGINE
Fig. 236 DSCN-0047a
Fig. 237 DSCN-0043a
4
4-5