Mower Spindle Assembly (2009 Model G3 Series Units) - Toro Z Master G3 3000 Series Service Manual

MOWER DECKS
14. Remove the large spacer in the spindle housing (Fig.
415).
15. This view shows the 2 bearing races and the large
spacer in the spindle housing (Fig. 416).
6
A. Brearing race spacer
6-12
Fig. 415 DSCN-2682a
A
B
A
Fig. 416
DSCN-2684a
B. Center spacer
Mower Spindle Assembly (2009 Model
G3 Series Units)
1. Install the spacer through the top of the spindle
housing (Fig. 417).
2. Using a press, install the upper bearing race into the
spindle housing (Fig. 418).
Note: The wider inside diameter of the bearing race
should be facing up to accept the tapered
bearing.
Toro Z Master G3 3000/5000/6000 Series Service Manual
Fig. 417 DSCN-2688a
Fig. 418 DSCN-2689a