Toro Z Master G3 3000 Series Service Manual page 44

10. Remove the clevis pin from the cable yoke (Fig.
083).
Fig. 083
11. Release the brake cable retainer holding the brake
cable to the frame (Fig. 084).
Fig. 084
Toro Z Master G3 3000/5000/6000 Series Service Manual
12. Slide the cable out of the slot (Fig. 085).
PICT-9001a
13. Pull the cable out over the frame cross bar and
remove it from the unit (Fig. 086).
PICT-9008a
CHASSIS
Fig. 085
PICT-9014a
Fig. 086 PICT-9017a
3
3-23