Mower Belt Installation - Toro Z Master G3 3000 Series Service Manual

MOWER DECKS
8. Remove the belt guide on the spring-loaded idler
arm shown in (Fig. 390).
9. Remove the existing belt.
6
6-2
Fig. 390 DSCN-0069a

Mower Belt Installation

1. Install the new belt around the mower deck pulleys
and the clutch pulley under the engine (Fig. 391).
A
G
F
A. Clutch pulley
B. Mower belt
C. Spring-loaded idler
pulley
D. Ratchet
2. Install the belt guide on the idler arm shown in (Fig.
391).
3. Using a 3/8" ratchet or breaker bar in the square
hole in the idler arm, install the idler spring (Fig.
391). Make sure the spring ends are seated in the
anchor grooves.
Toro Z Master G3 3000/5000/6000 Series Service Manual
B
C
D
E
Fig. 391 fig. 81 G009038
E. Square hole in the idler
arm for the ratchet
F. Idler grease zerk
G. Belt guide