Toro Z Master G3 3000 Series Service Manual page 43

CHASSIS
6. Release the brake cable retainer holding the brake
cable to the cradle. Push the cable through the
routing hole and remove (Fig. 079).
3
7. Remove the tie strap securing the brake cable to the
cradle (Fig. 080).
3-22
Fig. 079 PICT-8974a
Fig. 080 PICT-8977a
8. Remove the brake cable from the retainers located
on the cradle (Fig. 081).
Note: The cable is routed around the cradle.
B
A
A. Right side brake
assembly
B. Cradle
9. Remove the cotter pin located on the clevis pin hold-
ing the cable clevis to the brake lever (Fig. 082).
Toro Z Master G3 3000/5000/6000 Series Service Manual
C
D
D
Fig. 081 cables routing #4
C. Left side brake
assembly
D. Retainer (5)
Fig. 082 PICT-8999a