18. Release the parking brake.
19. Remove the nut securing the brake swivel to the
brake caliper arm (Fig. 277).
Fig. 277
20. Remove the 2 bolts and washers securing the brake
caliper to the UHT (Fig. 278).
Note: There is a spacer washer on each bolt be-
tween the caliper bracket and the UHT.
Fig. 278
Toro Z Master G3 3000/5000/6000 Series Service Manual
HYDRAULIC SYSTEM
21. Remove the caliper assembly from the wheel hub
(Fig. 279).
PICT-8582a
22. Repeat steps 19 – 21 on the opposite side of the
machine.
23. On the side of the machine being serviced, use a
wheel hub puller (Toro part no. TOR6006) to remove
the wheel hub from the UHT wheel shaft (Fig. 280).
PICT-8584
Fig. 279
PICT-8586a
Fig. 280
PICT-8587a
5
5-5