Toro Z Master G3 3000 Series Service Manual page 94

20. Install the throttle cable in the cable clamp (Fig.
257).
Fig. 257
21. Move the throttle control to the slow idle position
(Fig. 258).
Fig. 258
Toro Z Master G3 3000/5000/6000 Series Service Manual
22. Move the throttle arm assembly to the low-idle
position and tighten the throttle cable clamp (Fig.
259).
DSCN-4253a
23. Move the throttle control back and forth, checking
the operation of the throttle arm assembly.
24. Install 2 nuts retaining the rear guard to the frame
and 1 carriage bolt nut retaining the muffler guard to
the rear guard (Fig. 260).
DSCN-4277a
ENGINE
Fig. 259 DSCN-4281a
Fig. 260 DSCN-0012a
4
4-11