Toro Z Master G3 3000 Series Service Manual page 156

5. Remove the top oil seal (Fig. 440).
Fig. 440
6. Using a hammer and driver with a square edge,
drive the bearing out of the spindle housing (Fig.
441).
Fig. 441
Toro Z Master G3 3000/5000/6000 Series Service Manual
7. Remove the spacer from the spindle housing (Fig.
442).
DSCN-0092a
8. Using a hammer and driver with a square edge,
drive the bottom bearing and seal out of the spindle
housing (Fig. 443).
DSCN-0093
MOWER DECKS
Fig. 442
Fig. 443
DSCN-0094a
6
DSCN-0096a
6-19