Toro Z Master G3 3000 Series Service Manual page 56

6. Pull the brake cable out of the cable anchor on the
transmission and slide it out of the slot (Fig. 126).
Fig. 126
7. Squeeze the tabs on the conduit fitting and remove it
from cable bracket located on the frame (Fig. 127).
Fig. 127
Toro Z Master G3 3000/5000/6000 Series Service Manual
8. Remove the two clips retaining the brake cable to
the frame (Fig. 128).
DSCN-4325a
9. Remove the two screws retaining the right hand
motion control cover assembly to the frame and
remove (Fig. 129).
DSCN-4327a
CHASSIS
Fig. 128 DSCN-4328a
Fig. 129 DSCN-2614a
3
3-35