Brake Caliper Installation - Toro Z Master G3 3000 Series Service Manual

Brake Caliper Installation

1. Install the brake mount plate to the caliper (Fig. 176).
Fig. 176
2. Apply thread locker to the 2 bolts that retain the
brake mount plate (Fig. 177).
Fig. 177
Toro Z Master G3 3000/5000/6000 Series Service Manual
3. Install two washers between the brake mount plate
and the transmission and tighten the bolts (Fig. 178).
DSCN-4398a
4. Install the L-bracket, spring, washer, and nut on the
threaded end of the brake cable (Fig. 179).
DSCN-4400a
CHASSIS
Fig. 178 DSCN-4402a
Fig. 179
DSCN-4314a
3
3-49