Adjusting The Parking Brake - Toro Z Master G3 3000 Series Service Manual

CHASSIS

Adjusting the Parking Brake

1. Open the push valve (vertical position) on the hydro
unit that you are replacing the brake cable on (Fig.
117).
3
2. Ensure the parking brake is disengaged.
Note: The left side brake is being adjusted in the
following steps; the right side adjustment is
performed the same way.
3-32
Fig. 117 PICT-8677a
3. Using hands and fingers only, push the caliper lever
arm forward to engage the brake pads on the wheel
hub until the lever stops (Fig. 118).
A
A. Standard nut
4. While holding the lever, use the other hand or fingers
to pull the cable threaded end tight through the
swivel. Spin the standard nut against the swivel (Fig.
119).
Toro Z Master G3 3000/5000/6000 Series Service Manual
B
Fig. 118 PICT-8679a
B. Lock nut
Fig. 119
PICT-8680a