Toro Z Master G3 3000 Series Service Manual page 121

HYDRAULIC SYSTEM
15. Pull the brake cable out of the cable anchor on the
transmission and slide it out of the slot (Fig. 346).
16. On the side of the machine being serviced, use a
wheel hub puller (Toro part number TOR6006) to
remove the wheel hub from the UHT wheel shaft
5
(Fig. 347).
5-26
Fig. 346 DSCN-4325a
Fig. 347 DSCN-4517a
17. On the side of the machine not being serviced,
remove the three carriage bolts and nuts securing
the UHT transmission to the cradle (Fig. 348).
18. On the side of the machine being serviced, remove
the bottom carriage bolt and nut securing the UHT
transmission to the cradle (Fig. 349).
Toro Z Master G3 3000/5000/6000 Series Service Manual
Fig. 348 DSCN-4518a
Fig. 349 DSCN-4520a